FUCHS RENOLIN UNISYN CKC
聚α-烯烃为基础的工业齿轮润滑
设计用于工业齿轮箱和一般的润滑系统受高温，RENOLIN UNISYN CKC油是全合成润滑油基于聚α-烯烃。RENOLIN UNISYN CKC油减少摩擦、降低磨损。此外，这些油提高了机器部件的效率。根据不同的应用，多个粘度等级可以由一个单一的RENOLIN UNISYN CKC油满意。这可以让用户合理化库存和降低成本。聚α烯烃，从而RENOLIN UNISYN CKC油，可与矿物油都比兼容，可设置等。与普通机械材料聚α烯烃的相容性，密封和油漆与矿物油的比较。改变过去RENOLIN UNISYN CKC因此非常简单，无需事先冲洗。RENOLIN UNISYN CKC油可分为CKC润滑油根据ISO 6743-6
使用RENOLIN UNISYN CKC油的具体利益：
耐老化性好
优良的防腐蚀保护
良好的流动性
优良的粘度-温度特性
应用：
RENOLIN UNISYN CKC油可用于轴承、润滑系统和高或温度波动变速箱。
在齿轮箱和润滑系统的油底壳温度超过90°C，普通矿物油更换周期可以显著延长RENOLIN UNISYN CKC油，反过来，大幅降低运营和处置成本。
当改用RENOLIN UNISYN CKC油的机器和设备，经营超过60°C的温度，比普通矿物油等级应选择低粘度等级。
| RENOLIN UNISYN CKC |
|
68 |
100 |
150 |
220 |
320 |
460 |
680 |
|
| Lubricating oil type |
|
|
|
|
|
|
|
|
|
| acc. to ISO 6743-6 |
|
CKC 68 |
CKC 100 |
CKC 150 |
CKC 220 |
CKC 320 |
CKC 460 |
CKC 680 |
|
| acc. to DIN 51 502 |
|
HC 68 |
HC 100 |
HC 150 |
HC 220 |
HC 320 |
HC 460 |
HC 680 |
|
| Characteristics |
Unit |
|
|
|
|
|
|
|
Test method |
| Kinematic viscosity |
|
|
|
|
|
|
|
|
|
| at 40 °C |
mm²/s |
72 |
104 |
151 |
221 |
315 |
479 |
668 |
ASTM D 445 |
| at 100 °C |
mm²/s |
11.1 |
14.9 |
19.4 |
25.8 |
33.3 |
45 |
62 |
ASTM D 445 |
| Viscosity index |
|
146 |
149 |
147 |
148 |
148 |
149 |
159 |
ASTM D 2270 |
| Density at 15 °C |
kg/l |
0.837 |
0.842 |
0.848 |
0.85 |
0.851 |
0.853 |
0.855 |
ASTM D 1298 |
| Flash point, Cleveland open cup |
°C |
248 |
254 |
230 |
232 |
234 |
304 |
262 |
ASTM D 92 |
| Pour point |
°C |
-51 |
– 45 |
– 45 |
– 42 |
– 39 |
– 33 |
– 33 |
ASTM D 97 |
| Neutralization number |
mg KOH/g |
0.8 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
ASTM D 974 |
| Foaming, |
|
|
|
|
|
|
|
|
|
| seq. I |
ml |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
ASTM D 892 seq. I III |
| seq. II |
ml |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
ASTM D 892 seq. I III |
| seq. III |
ml |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
ASTM D 892 seq. I III |
| Copper corrosion |
degree of corr. |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
ASTM D 130 |
| Rust prevention |
|
pass B |
pass B |
pass B |
pass B |
pass B |
pass B |
pass B |
ASTM D 665 |
| Four ball EP test |
N |
2200 |
2400 |
2400 |
2400 |
2400 |
2400 |
2400 |
ASTM D 2783 |
| FZG mechanical gear rig test |
load stage |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
DIN 51 354-2 |
|
